Craft Interface Terminal Usage
11-134 Issue 8.0 July 2002
Releases 4.1 and Earlier
This report shows access and timeout information for different ports. The top two
entries are enabled for access and they are accessed by luc01 and luc02,
respectively. The hyphen ("-") indicates that no current access over the DCC is
being made to the network element. A report for an FT-2000 repeater bay/shelf is
the same except the "Access Port" entry (cit-dcc) does not exist.
Access
Port
- Shows the identity of the port (operations interface).
Port
Status
- Shows if the port will or will not accept nonprivileged user
logins (enabled or disabled).
Current
Login
- Shows the login of the user that is currently logged on the
port.
Delta-1 93-01-19 23:15:15 EST
M Retrieve-Security-Port: COMPLD
/* Access Port Security Configuration Report
======================================================================
Access Port Current
Port Status Login
======================================================================
cit-dce enabled luc01
cit-dte enabled luc02
cit-dcc enabled -
*/
;
To Next Page
Loading...
Need help?
General