Craft Interface Terminal Usage
11-154 Issue 8.0 July 2002
5. Compare displayed screen with information below and note any
differences:
*
This value (zero) disables the inactivity timer.
6. As an exercise, the baud rate will be set to 9600, even if it is already set to
9600.
Useup(↑) and down (↓) arrow keys to move highlighted area to Baud
Rate parameter value.
Communications: com-1 (as appropriate)
Baud Rate: 9600
Monitor: (appropriate value for type of monitor)
Inactivity (minutes): (value between 0* and 9999)
Blinking Remote: on
Paging: on
To Next Page
Loading...