Craft Interface Terminal Usage
Issue 8.0 July 2002
11-161
19.
NOTE:
You are now going to use the Set-Date command to set the hour of the
day. (After completing this tutorial, you may want to set the time back to the
original value.)
Use the ↑ and ↓ arrow keys to highlight the verb Set and press .
The figure shows the menu for an Add/Drop-Rings Terminal. The menu for
other platforms may differ slightly.
20. Use ↓ and ↑ keys to highlight Date, but do not press at this
time.
21.
NOTE:
When function key is labeled HELP, it can be pressed to obtain
information about the item highlighted on the screen.
Press function key labeled HELP to display the explanation of the
highlighted item.
ENTER
ENTER
F1
F1
To Next Page
Loading...
Need help?
General