Craft Interface Terminal Usage
11-178 Issue 8.0 July 2002
69. Select the CONFIGURATION-Delete-Crossconnection-STS3
command to remove the cross-connection established in Step 67. Using
the same example, select the CONFIGURATION-Delete-
Crossconnection-STS3: 2-way,5b,1w-5 command.
70. Select the CONFIGURATION-Retrieve-Crossconnection-All
command to obtain an updated STS-1 Cross-Connection Map Report and
verify the cross-connection has been removed.
71. Log off the CIT by pressing (LOGOUT) or exit FT-2000 CIT-PC by
pressing (EXIT) as appropriate.
72. STOP! YOU HAVE COMPLETED THE ADD/DROP-RINGS TERMINAL
TUTORIAL.
F4
F5
To Next Page
Loading...