Mitel 430 - Page 138

Routing elements
138
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
ternal destination (case B), a PISN user (case B), an integrated mobile/external user
(case B) or voice mail (case B).
The assigned permission set of this user has the parameter Execute call forwarding on
no reply even call destination is busy activated. The user and all other members in the
user group are busy.
Response to an incoming call:
Case A: The call forwarding on no reply is executed in each case.
Case B: Call forwarding on no reply is only executed if the parameter ( Members re-
main in user group if forwarded to external destination and Remain in user group if
forwarded to an external destination are executed. Otherwise, the response is as de-
scribed in the section " Response if busy"
below.
Status of the user group members
The status of the user group members are visible for each user group or user with a
symbol.
Response if busy
If all the members are busy, the system will respond as follows:
• An external call will be routed in accordance with the emergency routing concept
(see "Response if busy", page 180
.
• An internal call will be acknowledged with the busy tone.
Caller identification on the terminal
• Call identification during a call:
The name of the user group is displayed along with the CLIP
• Once a member has answered a call, an entry is made in the list of answered calls
for this member.
If the call remains unanswered, it generates entries in the lists of unanswered calls
of all the UG members. This can be changed in the assigned permission set (Pa-
rameter Unanswered calls via user group in calling list).
Cordless phones
Cordless phones like other terminals are assigned to a user. The following restrictions
apply:
• Two DECT phones are allowed per user.
• In the UGs 1...16 (Mitel 415/430) or 1...24 (Mitel 470) the group call is used for
those DECT cordless phones on which the parameter Busy on busy is deacti-