NetCommWireless NTC-400 Series User Manual

174 of 361
User Guide
© NetComm Wireless 2018
Configuration Path
[My Certificate]-[Root CA Certificate Configuration]
Name
NTCRootCA
Key
Key Type: RSA Key Length: 1024-bits
Subject Name
Country(C): AU State(ST): NSW Location(L): Sydney
Organization(O): NetCommWireless Organization Unit(OU): NTC
Common Name(CN): NTCRootCA E-mail:
ntcrootca@netcommwireless.com
Configuration Path
[My Certificate]-[Local Certificate Configuration]
Name
NTCCRT Self-signed: ■
Key
Key Type: RSA Key Length: 1024-bits
Subject Name
Country(C): AU State(ST): NSW Location(L): Sydney
Organization(O): NetCommWireless Organization Unit(OU): NTC
Common Name(CN): NTCCRT E-mail: ntccrt@netcommwireless.com
Configuration Path
[IPSec]-[Configuration]
IPSec
■ Enable
Configuration Path
[IPSec]-[Tunnel Configuration]
Tunnel
■ Enable
Tunnel Name
s2s-101
Interface
WAN 1
Tunnel Scenario
Site to Site
Operation Mode
Always on
Configuration Path
[IPSec]-[Local & Remote Configuration]
Local Subnet
10.0.76.0
Local Netmask
255.255.255.0
Full Tunnel
Disable
Remote Subnet
10.0.75.0
Remote Netmask
255.255.255.0
Remote Gateway
118.18.81.33

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English