Figure 13 – LAN Interface Network Status
Item Value setting Description
IPv4 Address System data. Displays the current IPv4 IP Address of the gateway
This is also the IP Address user use to access Router’s Web-
based Utility.
IPv4 Subnet Mask System data. Displays the current mask of the subnet.
IPv6 Link-local
Address
System data. Displays the current LAN IPv6 Link-Local address.
This is also the IPv6 IP Address user use to access Router’s
Web-based Utility.
IPv6 Global
Address
System data. Displays the current IPv6 global IP address assigned by your ISP
for your Internet connection.
Action Button This area provides functional buttons.
Edit IPv4 Button when press, web-based utility will take you to
the Ethernet LAN configuration page. (Basic Network > LAN &
VLAN > Ethernet LAN tab).
Edit IPv6 Button when press, web-based utility will take you to
the IPv6 configuration page. (Basic Network > IPv6 >
Configuration.)
Table 6 – LAN Interface Network Status
3G/4G Modem Status
The 3G/4G Modem Status List screen shows status information for 3G/4G WAN network(s).
Figure 14 – 3G/4G Modem Status
Item Value setting Description
Physical
Interface
System data. Displays the type of WAN physical interface.
Note: Some device model may support two 3G/4G modules. Their
physical interface name will be 3G/4G-1 and 3G/4G-2.
Card
Information
System data. Displays the vendor’s 3G/4G modem model name.
Link Status System data. Displays the 3G/4G connection status. The status can be
Connecting, Connected, Disconnecting, and Disconnected.
Signal
Strength
System data. Displays the 3G/4G wireless signal level.
Network
Name
System data. Displays the name of the service network carrier.
To Next Page
Need help?
General