NetCommWireless NTC-400 Series

30 of 361
User Guide
© NetComm Wireless 2018
OpenVPN Server Status
According to OpenVPN configuration, the OpenVPN Server/Client Status shows the status and statistics for the OpenVPN
connection from the server side or client side.
Figure 24 – OpenVPN Server Status
Item Value setting Description
User Name System data. Displays the Client name you have entered for identification.
Remote
IP/FQDN
System data. Displays the public IP address (the WAN IP address) of the
connected OpenVPN Client
Virtual IP/MAC System data. Displays the virtual IP/MAC address assigned to the connected
OpenVPN client.
Conn. Time System data. Displays the connection time for the corresponding OpenVPN
tunnel.
Status System data. Displays the connection status of the corresponding OpenVPN
tunnel.
The status can be Connected, or Disconnected.
Table 16 – OpenVPN Server Status
OpenVPN Client Status
Figure 25 – OpenVPN Client Status
Item Value setting Description
OpenVPN Client
Name
System data. Displays the Client name you have entered for identification.
Interface System data. Displays the WAN interface specified for the OpenVPN client
connection.
Remote
IP/FQDN
System data. Displays the peer OpenVPN Server’s Public IP address (the WAN IP
address) or FQDN.
Remote Subnet System data. Displays the Remote Subnet specified.
TUN/TAP
Read(bytes)
System data. Displays the TUN/TAP Read Bytes of OpenVPN Client.
TUN/TAP
Write(bytes)
System data. Displays the TUN/TAP Write Bytes of OpenVPN Client.
TCP/UDP
Read(bytes)
System data. Displays the TCP/UDP Read Bytes of OpenVPN Client.