Setting up Compax3 C3F_T40
80 192-121102 N04 June 2008
4.1.15. Recipe table
If you would like to work with the recipe array (see page 157), (e.g. for the storage
of variable machine data) you can make preassignments in it with Compax3
ServoManager.
Note:
The recipe array can also be loaded separately into the device (>button on the right
side).
4.1.16. Error response
Under "configuring: Under "configuration: error reaction" you can change the error
reaction for individual errors (the error no. which can be influenced is displayed).
Possible settings for the error reaction are:
No response
downramp / stop
Downramp / switch to currentless (standard setting)
To Next Page
Loading...
