Parker Compax3 Fluid T40

Parker EME
Communication
192-121102 N04 June 2008 333
In this chapter you can read about:
Compa3 communication variants .....................................................................................333
COM port protocol ............................................................................................................345
Remote diagnosis via Modem ..........................................................................................350
Profibus ............................................................................................................................354
CANopen - Node Settings ................................................................................................367
DeviceNet.........................................................................................................................385
Ethernet Powerlink ...........................................................................................................388
HEDA Bus ........................................................................................................................390
Here you will find the description of the fieldbus interfaces, which can be configured
in the Compax3 ServoManager under the tree entry "configuring the
communication".
The configuration of the process data (Mapping) is made wizard-guided with the
Compax3 ServoManager.
If you perform the mapping directly via the master, you must go through this
fieldbus wizard once; the Compax3 ServoManager will perform the necessary
initializations.
6.1 Compa3 communication variants
In this chapter you can read about:
PC <-> Compax3 (RS232) ...............................................................................................334
PC <-> Compax3 (RS485) ...............................................................................................335
PC <-> C3M device combination (USB)...........................................................................336
USB-RS485 Moxa Uport 1130 adapter ...........................................................................337
ETHERNET-RS485 NetC
OM 113 adapter.......................................................................338
Modem Westermo TD-36 485 ..........................................................................................340
C3 settings for RS485 two wire operation ........................................................................343
C3 settings for RS485 four wire operation .......................................................................344
Overview of all possible communication modes between Compax3 deviecs and a
PC.
6. Communication
Please note: