Setting up Compax3 C3F_T40
94 192-121102 N04 June 2008
Functions:
Select background color: Adapt background color to personal requirements.
Select grid color: Adapt grid color to personal requirements.
Memorize OSCI settings in file: The settings can be memorized in a file on any
drive. The file ending is *.OSC.
The format correspnds to an INI file and is presented in the appendix.
open OSCI settings from file. Loading a memorized set of settings. The file
ending is *.OSC.
Memorizing OSCI settings in the project: Up to four sets of OSCI settings can
be memorized in the current C3 ServoManager project. .
open OSCI settings from project. If settings were memorized in the project,
they can be read in again.
Memorize OSCI measurement in file: Corresponds to memorizing the setting;
the measurement values of the measurement are stored in addition. Thus it is
possible to memorize and read measurements completely with settings. The file
ending is *.OSM.
Exporting measurement values into a CSV file: e.g. for reading into Excel.
To Next Page
Loading...
