ENERGY SAVER MODES
2-126
A229 SM
2.11 ENERGY SAVER MODES
2.11.1 OVERVIEW
When the machine is not used, the energy saver function reduces power
consumption by decreasing the fusing temperature.
This machine has three energy saver modes.
1) Energy saver mode
2) Low power mode
3) Off mode (this has two modes, Auto Off Mode and Weekly Timer Off Mode)
These modes are controlled by the following UP modes.
•
Low power timer: The machine enters energy saver mode when this runs out
•
Low power shift timer: The machine enters low power mode when this runs out
•
Auto off timer: The machine enters auto off mode when this runs out
•
Weekly timer programming: Programs a timer for the machine to switch itself on
and off (this is for Weekly Timer Off Mode)
•
Auto off mode disabling (User Tools – System Setting – Count Manager - AOF) If
auto off mode is disabled, the machine will never enter auto off mode. The fusing
lamps will always stay on, but the machine will still be able to enter energy saver
and low power modes.
The way that the machine operates depends on the combination of installed
equipment (copier only, copier/printer).
A229D647.WMF
To Next Page
Loading...
