Ricoh A229 - Air Pump and Toner Collection Motor Replacement

DRUM UNIT
A229 5-46 SM
5.5.11 AIR PUMP AND TONER COLLECTION MOTOR
REPLACEMENT
1. Open the front doors then remove the toner collection bottle [A]
(1 push-lock [B]).
2. Remove the upper and lower rear covers. (Refer to Upper and Lower Rear
Cover Removal.)
3. Remove the paper feed unit control board. (Refer to Paper Feed Control Board
Removal)
4. Remove the air pump unit [C] (1 tube, 1 connector and 2 screws).
5. Remove the toner collection motor [D] (2 connectors, 2 screws).
NOTE:
When re-installing the toner collection motor, be sure to put the 2
positioning pins in the holes in the machine rear frame.
A229R568.WMF
A229R569.WMF
[A]
[B]
[C]
[D]