JAM CONDITIONS
SM 7-17 A229
Finisher
A697
2.10 JAM CONDITIONS
1. The entrance sensor does not turn on within 450 ms after the copier exit sensor
turns off.
2. The entrance sensor does not turn off within 1,325 ms after it turns on.
3. The upper tray exit sensor does not turn on within 1,630 ms after the entrance
sensor turns on.
4. The upper tray exit sensor does not turn off within 1,325 ms after it turns on.
5. In sort/stack mode, the shift tray exit sensor does not turn on within 2,090 ms
after the entrance sensor turns on.
6. In sort/stack mode, the shift tray exit sensor does not turn off within 1,325 ms
after it turns on.
7. In staple mode, the stapler tray entrance sensor does not turn on within 3,700
ms after the entrance sensor turns on.
8. In staple mode, the stapler tray entrance sensor does not turn off within 1,325
ms after it turns on.
9. In staple mode, the stapler tray paper sensor does not turn off within 250
pulses of the stack feed-out motor after it starts.
10. In staple mode, the shift tray exit sensor does not turn off within 1,260 ms after
the stack feed-out motor starts.
To Next Page