COPIER (A229)
SM 3-5 A229
Installation
CAUTION
Keep the power cord unplugged when starting the following procedure.
NOTE:
1) Keep the shipping retainers after installing the machine. They will be
reused if the machine is moved to another location in the future.
2) Insert the levelling shoes [A] under the levelling feet [B] at the front, and
level the machine before starting the installation. (The levelling feet [B]
can be screwed up or down.) Extra levelling shoes (AH013008) and
levelling feet (AH011004) are available as spare parts.
1. Remove all strips of tape as shown above.
2. Keep the factory setting data sheet [C] for future usage.
3. Draw out trays 1 and 2, and take out the accessory items [D] placed inside.
A229I517.WMF
A229I518.WMF
A229I513.WMF
[A]
[B]
[D]
[C]
To Next Page
Loading...
