ELECTRICAL COMPONENT DEFECTS
A229 6-30 SM
Component
(Symbol)
CN Condition Symptom
1st Paper Feed
(S12)
CN269-
A2
Stays On “Paper Jam” is displayed even if there is no
paper.
(PFB) Stays Off “Paper Jam” is displayed whenever a copy
is made.
2nd Paper
Feed (S13)
CN269-
B2
Stays On “Paper Jam” is displayed even if there is no
paper.
(PFB) Stays Off “Paper Jam” is displayed whenever a copy
is made.
3rd Paper Feed
(S14)
CN270-2
(PFB)
Stays On
“Paper Jam” is displayed even if there is no
paper.
Stays Off “Paper Jam” is displayed whenever a copy
is made.
1st Lift (S15) CN269-
A8
Stays On SC501 is displayed.
(PFB) Stays Off SC501 is displayed.
2nd Lift (S16) CN269-
B8
Stays On SC502 is displayed.
(PFB) Stays Off SC502 is displayed.
3rd Lift (S17) CN270-8 Stays On SC503 is displayed.
(PFB) Stays Off SC503 is displayed.
1st Paper End
(S18)
CN269-
A5
Stays On “Paper End” is displayed even if there is
paper in the 1st paper tray.
(PFB) Stays Off “Paper End” is not displayed even if there is
no paper in the 1st paper tray.
2nd Paper End
(S19)
CN269-
B5
Stays On
“Paper End” is displayed even if there is
paper in the 2nd tray.
(PFB) Stays Off “Paper End” is not displayed even if there is
no paper in the 2nd tray.
3rd Paper End
(S20)
CN270-5
(PFB)
Stays On “Paper End” is displayed even if there is
paper in the 3rd tray.
Stays Off “Paper End” is not displayed even if there is
no paper in the 3rd tray.
By-pass Paper
End (S21)
CN211-
A5
Stays On “Paper End” is displayed even if there is
paper in the by-pass tray.
(IOB) Stays Off “Paper End” is not displayed even if there is
no paper in the by-pass tray.
1st Near End
(S22)
CN262-2
(PFB)
Stays On “Paper Near End” is not displayed even if
the tray is almost empty.
Stays Off
“Paper Near End” is displayed even if there
is enough paper in the paper tray.
2nd Near End
(S23)
CN262-5
(PFB)
Stays On “Paper Near End” is not displayed even if
the tray is almost empty.
Stays Off “Paper Near End” is displayed even if there
is enough paper in the paper tray.
To Next Page