Message Cause Solution
“User Name” and “Password” are
correctly programmed. You can
also use the Web Image Monitor
for confirmation. See the Web
Image Monitor's Help.
• Contact the network administrator.
"Check whether there are
any network problems."
[15-03]
No machine e-mail address is
programmed.
• In [System Settings], under [File
Transfer], check that the machine e-
mail address is correctly
programmed. You can also use the
Web Image Monitor for
confirmation. See the Web Image
Monitor's Help.
• Contact the network administrator.
"Check whether there are
any network problems."
[15-11]
Cannot find the DNS server or
POP3/IMAP4 server.
• In [System Settings], under
[Interface Settings], check the IP
address of the DNS Server is
correctly programmed. You can
also use the Web Image Monitor
for confirmation. See the Web
Image Monitor's Help.
• In [System Settings], under [File
Transfer], select [POP3 / IMAP4
Settings], and then check “Server
Name” is correctly programmed.
You can also use the Web Image
Monitor for confirmation. See the
Web Image Monitor's Help.
• In [System Settings], under [File
Transfer], select [E-mail
Communication Port], and then
check the port number of the
POP3/IMAP4 server is correctly
programmed. You can also use the
Web Image Monitor for
confirmation. See the Web Image
Monitor's Help.
Messages Displayed When Using the Facsimile Function
41
To Next Page
Loading...
