Message Cause Solution
• In [Printer Features], under [Host
Interface], select [I/O Buffer], and
then set the maximum buffer size to
a larger value.
• Reduce the number of files being
sent to the machine.
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
RDH authentication was
already registered in a
different server with a
different ID, and a
duplication of the user name
occurred due to a switching
of domains (servers),etc.
Contact the administrator.
"Insufficient Memory" A memory allocation error
occurred.
On the RPCS printer driver's [Print
Quality] tab, open the [Change User
Settings...] dialog box, and then, on the
[Image Adjustments] tab, specify a
lower value for [Resolution:].
"Memory Overflow" The memory is full. • On the RPCS printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, specify a lower value for
[Resolution:].
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
If this message continues to appear after
taking these steps, decrease the number
of files sent to the machine.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn off the main power switch, and
back on again. If the message appears
again, replace the RAM.
"No response from the server.
Authentication has failed."
A timeout occurred while
connecting to the server for
Check the status of the server.
Messages Displayed When Using the Printer Function
65
To Next Page
Loading...
