Function name Description
Reception File Print Quantity Specify the number of copies to be printed for each fax
document received.
Paper Tray Use this function to print fax documents received from
programmed senders and fax documents from other senders,
using different paper trays.
Specify Tray for Lines Specify a paper tray for each line (telephone, Internet Fax,
IP-Fax).
Folder Transfer Result Report You can set whether the Folder Transfer Result Report is
transmitted to the specified e-mail address, when folders are
programmed as the forwarding destinations to which
documents are sent from all senders or Special Senders.
Memory Lock Reception When you switch Memory Lock on, received documents are
stored in memory and not printed automatically. To print this
document, enter the Memory Lock ID.
Initial Settings
Function name Description
Parameter Setting User Parameters allow you to customize various settings to
suit your needs.
Parameter Setting: Print List Print this list to see the current User Parameter settings.
Program Closed Network Code Register an ID required for Closed Network communication.
Program Memory Lock ID Program a Memory Lock ID to be entered before printing
documents when the Memory Lock function is activated.
Internet Fax Setting You can select to display the Internet Fax icon or not.
Select Dial / Push Phone Use this function to select a line type when the machine is
connected to a G3 analog line.
Program Fax Information Program information to be shown on the display of the other
machine and printed as a report.
Enable H.323 Specify whether or not H.323 is used for IP-Fax transmission.
Enable SIP Specify whether or not SIP is used for IP-Fax transmission.
Function List
321
To Next Page
Loading...
