Host Interface
Menu Description
I/O Buffer You can set the size of the I/O Buffer. Normally it is not
necessary to change this setting.
I/O Timeout You can set how many seconds the machine should wait
before ending a print job. If data from another port usually
arrives in the middle of a print job, you should increase this
timeout period.
PCL Menu
Menu Description
Orientation You can set the page orientation.
Form Lines You can set the number of lines per page.
Font Source You can set the storage location of the default font.
Font Number You can set the ID of the default font you want to use.
Point Size You can set the point size you want to use for the selected
font.
Font Pitch You can set the number of characters per inch for the selected
font.
Symbol Set You can specify the set of print characters for the selected
font.
Courier Font You can select a courier font type.
Extend A4 Width You can extend the printing area width when printing on A4
sheet with PCL.
Append CR to LF When set to On, a carriage return will follow each line feed:
CR=CR, LF=CR LF, FF=CR FF.
Resolution You can set the print resolution in dots per inch.
5. Appendix
140
To Next Page
Loading...
Need help?
General