Risco ProSYS series User Manual

ProSYS Installation and Programming Manual 203
Listen In/ Message Unit
Input Power
8V DC to 14V DC
Current Consumption
9 mA (standby) / 60 mA (active speaking - normal volume) / 130
mA (active speaking - full volume)
Audio Signal
Vin max = 2.5V pp / Vout max = 4V pp
Dimensions
6.2 cm x 11.3 cm x 3.2 cm
Voice Messages Module
Input Power
12V DC
Current Consumption
6mA typique / 26mA maximum
Dimensions
6.6 cm x 6.6 cm x 1.8 cm
Proximity Key Reader
Input Power
13.8VDC ±10%
Current Consumption
70 mA, typical / 180 mA maximum
Main Panel Connection
4-wire BUS, up to 1000 ft (300 m)
Dimensions
40 x 43,6 x 22 mm
GSM/GPRS Communication Module
Input Power
13.8VDC ±10%
Current Consumption
During Communication - 300mA, During Standby - 70mA
Battery (Not supplied)
Lead Acid (rechargeable), 12VDC/1.2Ah
Main Panel Connection
4-wire BUS, up to (300 m)
Dimensions (in metal
casing) Width x Height x
Depth
185 x 275 x 65 mm
With antenna installed:
185 x 275 x 65 mm
Main Board Dimensions
82 mm x 160 mm x 25 mm
Advanced Communication Module (ACM)
Input Power
9-16 VDC
Current Consumption
~300mA@13VDC
Main Panel Connection
4-wire BUS, 300 m
Dimensions
180mmX85mm
Fast PSTN Modem 2400 BPS
Input power
13.8VDC ±10%
Current Consumption
100 mA maximum
Main Panel Connection
4-wire BUS, 300 m
Dimensions
10.5 cm x 6.6 cm

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud