Siemens SIMATIC BATCH

Table column Description Symbol Meaning
Batch runtime The batch runtime deter‐
mined by the system
-
Order category Name of the order category
Order Name of the order.
Master recipe Name of the master recipe
Formula Name of the used formula
RUP (recipe unit
procedure)
Symbol of the RUP, status
symbol of the RUP, name of
the RUP
RUP runtime The runtime for a recipe unit
procedure (RUP) determined
by the system. If a time-out
occurs, a time symbol is dis‐
played.
ROP (recipe opera‐
tion)
Symbol of the ROP, status
symbol of the ROP, name of
the ROP If wait steps occur, a
time symbol is displayed.
Italic font if more than one
ROP is active.
ROP runtime The runtime for a recipe oper‐
ation determined by the sys‐
tem. If a time-out occurs, a
time symbol is displayed.
Shortcut menu in the control
The commands available in the shortcut menu in the control are described based on examples
in the following table.
The commands are essentially operator commands for active batches, like those listed
previously for the SIMATIC BATCH OS Process Cell control.
Symbol Shortcut menu
command
Symbol Subcommand Meaning
Unit Revoke release Use this command to revoke the unit
enable for SIMATIC BATCH. This
means that SIMATIC BATCH cannot
occupy this unit.
Register for mainte‐
nance
Use this command to sign on the unit
for maintenance.
BATCH OS controls
11.3 Operations in process mode
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 607