Siemens SIMATIC BATCH

Symbol Shortcut menu
command
Symbol Subcommand Meaning
Batch New batch(es) Creates new batches in the display
area of the OS Control Creation based
on a selected batch. In the case of
multiple selection, the data from the
batch that was first selected is always
used as the template data.
Properties Opens the "Batch properties" dialog.
The dialog provides batch information
and settings on the following tabs:
● Order category
● Order
● Batch
● Parameter
● Allocation: Unit and strategy
selection
● Comments
● Chaining
Delete batch Deletes the batch. All list entries of this
batch are thereby removed in this con‐
trol.
Close batch Closes finished, aborted or canceled
batches.
Hold batch after active
step
Holds the selected and running batch
after the current step, if you have con‐
firmed the command.
Hold batch immediate‐
ly
Holds the selected and running batch
immediately following your confirma‐
tion.
Stop batch Stops the selected and running batch
following your confirmation.
Abort batch Aborts the selected and running batch
following your confirmation.
Abort batch (emergen‐
cy)
Aborts the selected and running batch
following your confirmation.
Add batch to favorites Adds the batch as a favorite to the
"Favorites" tab in the OS control prop‐
erties.
Remove batch from fa‐
vorites
Removes the batch from the favorites
in the "Favorites" tab in the OS control
properties.
BATCH OS controls
11.3 Operations in process mode
SIMATIC BATCH V8.2
608 Operating Manual, 02/2016, A5E35958174-AA