Strasbaugh nTellect 7AF - Page 1372

7AF Back Grinder
Input Labels
Tue Aug 17, 2004 10:59 AM Input Labels - Page 1
No. Label No. Label No. Label No. Label
1 Coarse Spindle
Cool Servo H2O
2 Fine Spindle
Cool Servo H2O
3 LT Work Chuck
Cool Servo H2O
4 RT Work Chuck
Cool Servo H2O
5 Coarse Spindle
PSI
6 Fine Spindle
PSI
7 LT Work Chuck
PSI
8 RT Work Chuck
PSI
9 Send1 Cass Pres 10 Send1 Load Pos 11 Send1 Robot Pos 12 Send2 Cass Pres
13 Send2 Load Pos 14 Send2 Robot Pos 15 Rec1 Cass Pres 16 Rec1 Load Pos
17 Rec1 Robot Pos 18 Rec2 Cass Pres 19 Rec2 Load Pos 20 Rec2 Robot Pos
21 Exhaust OK 22 Drain Level OK 23 Bridge
Lubricator
24 Interlock
Gull Doors
25 Interlock
Panels
26 Lower Left Door 29 L Grind Seal
Inflated
30 L Grind Seal
Deflated
31 R Grind Seal
Inflated
32 R Grind Seal
Deflated
33 Spin Chuck Up 34 Spin Chuck Down
35 Spin Station
Lid Up
36 Spin Station
Lid Down
37 LT Work Chuck
Cond Arm Up
38 LT Work Chuck
Cond Arm Down
39 LT Work Chuck
Cond Arm Park
40 LT Work Chuck
Cond Arm Over
41 Main PSI OK 43 RT Work Chuck
Cond Arm Up
44 RT Work Chuck
Cond Arm Down
45 RT Work Chuck
Cond Arm Park
46 RT Work Chuck
Cond Arm Over