96 Pamux User’s Guide
ANALOG BANK OPERATIONS
PamuxAnaBank16Config
PROTOTYPE:
int PamuxAnaBank16Config(int hAc28, int Bank, UINT OutputMask);
DESCRIPTION:
Configures a bank of analog I/O points as either inputs or outputs. A 1 in the mask indicates an
output.
PamuxAnaBank16Read
PROTOTYPE:
int PamuxAnaBank16Read(int hAc28, int Bank, int far DataArray16[])
DESCRIPTION:
Reads a bank of 16 analog points and places the values in the DataArray
(channel 0 in element 0 and channel 15 in element 15).
PamuxAnaBank16Write
PROTOTYPE:
int PamuxAnaBank16Write(int hAc28, int Bank, int far DataArray16[])
DESCRIPTION:
Writes values to a bank of analog points (channel 0 value in element 0).
PROGRAMING WITH THE PAMUX DRIVER
To Next Page
Loading...
