DIGITAL OUTPUT TEST MODULE
G4 Family Data Book 49
Digital Output Test Module
Description
Opto 22’s G4SWOUT output test module is used to simulate a G4 output on an I/O
mounting rack. Each module contains a manual toggle switch on the field side. The
switch closes a contact that shorts the field terminals to turn on a field output.
Internally, there is no connection to the logic side of the module.
The G4SWOUT module is ideal for testing field wiring and devices by simulating an
output from the computer. The switch handles 3 amps at 250 VAC/VDC.
Specifications
Dimensions and Schematics
2XWSXW YROWDJH UDQJH ëèí 9$&î9'&
,VRODWLRQñ LQSXWðWRðRXWSXW éñííí 9
UPV
7HPSHUDWXUH
2SHUDWLQJã
6WRUDJHã
ðêíWRòæí°&
ðêíWRòåè°&
To Next Page
Loading...
