Strasbaugh Universal Vacuum System
Page 6 Version 1.2—March 2004
SAFETY
OVERVIEW
The safety information in this section is intended to provide for safe operation and
maintenance of the Strasbaugh Universal Vacuum System (UVS).
A checklist of basic safety instructions addresses general operation. The Visual Hazard
Alerts section explains hazard alert graphics used on the machines and in Strasbaugh
manuals. The Power Interrupts and Interlocks section explains machine safety features and
shutdown procedure.
GENERAL INFORMATION
Strasbaugh machines are designed for safe operation. However, caution must be exercised
when operating this machine. Failure to adhere to these safety instructions and to good
safety practices in general may result in personal injury or in damage to the machine.
Hearing protection should not be necessary, since the UVS produces less than 70 db(A)
sound pressure during normal operation.
It is the responsibility of the user to be sure that the machine is in safe operating condition
at all times. The user is also responsible for insuring that operators and maintenance
personnel follow approved operating and maintenance procedures. The following is a list
of safety instructions:
• DO NOT put hands or objects inside the UVS cabinet while the machine is powered-
up or in operation.
• Keep all guards and covers in place and in good repair.
• Interlocks and other safety circuits or devices may not be overridden except by trained
maintenance personnel using approved procedures. Operators must not override
interlocks or safety devices under any circumstances.
• Disconnect power when servicing or repairing the machine.
• DO NOT operate the machine without proper electrical grounding.
• DO NOT wear loose clothing that could be caught by machine parts in motion.
• Wear SAFETY GLASSES when working near moving machinery.
• Always heed visual hazard alert labels and messages.
To Next Page
