STRASBAUGH, INC.
7-12 February 19, 2002 7AF SECS/GEM Interface Ver. 1.9
Strasbaugh Confidential
7.8 Clock
7.8.1 Host Sets Date and Time
Step SECS Message Description
1.
H -> E S2F31 W
Date and Time Send. The Host sends a new Date and Time to the Equipment.
2.
H <- E S2F32
The Equipment sets its Clock/Calendar hardware and acknowledges the
command.
7.8.2 Host Requests Date and Time
Step SECS Message Description
1.
H -> E S2F17 W
Date and Time Request. The Host requests Date and Time from the
Equipment.
2. H <- E S2F18 The Equipment sends its Date and Time.
7.8.3 Equipment Requests Date and Time
Step SECS Message Description
1.
H <- E S2F17 W
Date and Time Request. The Equipment requests Date and Time from the
Host.
2.
H -> E S2F18
The Host sends its Date and Time. The Equipment sets its Clock/Calendar
hardware according to the contents of this message.
7.9 Spooling
For all of the spooling scenarios, spooling is meaningful only when Control State (CONTROLSTATE = 4 or 5) is "On-
Line". When CONTROLSTATE is "Off-Line" (CONTROLSTATE = 1, 2, or 3), Equipment sends only stream one
primaries and SnF0 secondaries, neither of which are eligible for spooling.
7.9.1 Host Enables Spooling of Messages
Step SECS Message Description
1.
H -> E S2F43 W
Host requests that messages be eligible for spooling using the following
message:
S2F43 W * H -> E
<L
<L [2]
<U1 STRID> * Msg Stream
<L
<U1 FCNID> * Msg Fcn
...
>
...
> .
To Next Page
