Operations and Maintenance Manual Machine Setup
Version 1.2 - June 2004 9 - 23
RECIPE PARAMETER SETTINGS AND INFORMATION AVAILABLE AT
THE WHEEL AND CHUCK RECIPES MENU
The section below provides details on the entries to be made and the information
displayed at the Wheel and Chuck Recipes menu.
DRESS AND TRUE RECIPE STEPS AND PARAMETERS
Grind Wheel Speed
The grind wheel spindle speed (in revolutions per minute), which remains constant
through the dressing (or truing) cycle, is set at this location. Grind wheel speed
settings may range from 500 to 4500 RPM.
Grind Wheel
Speed
value entered = grind wheel speed (for dressing or truing) in
RPM.
Dress and True Steps and Parameters
The column titles, displayed across the top of both the dress and true recipe
spreadsheets of the Wheel and Chuck Recipes menu, reflect the four programmable
segments of each process (dressing and truing).
The row titles, shown at the left side of each spreadsheet, list the process parameters
available to be set for the segments of the dressing or truing process.
To Next Page
Loading...
