Toptech Systems MultiLoad II User Manual

Chapter 4 – General Configuration
167
Firmware Version 3/4.31.37
Selecting the third menu point brings you to the standalone prompts. By entering the screen it is necessary to
select the prompt which needs to be changed.
After selecting the prompt it is possible to enter the length of the data , the bol settings and the languages
depends on what the driver card is set to.
P R O M P T S E T U P D E T A I L
Length of Data : 00
BOL Line : 0005
BOL Position: 0050
ENGLISH: Enter Stockholder
SPANISH: Enter Stockholder
PROTUGS:
FRENCH:
GERMAN:
SCHINES:
TCHINES:
THAI:
Next Prev Exit Enter
P R O M P T S E T U P
Prompt1
Prompt2
Prompt3
Prompt4
Prompt5
Next Prev Exit Enter
H A Z A R D S E T U P
Hazard1: DANGER! EXTREMELY FLAMMABLE. U4
Hazard2: LONG-TERM EXPOSURE MAY CAUSE C
Hazard3: ADDITIZED GASOLINE; MAY CONTAIN
Hazard4: BENZENE MAY CAUSE NERVOUS SYST
Hazard5: DO NOT USE IN REFORMULATED GAS
Next Prev Exit Enter

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English