Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
244
Firmware Version 3/4.31.37
yyyy is the facility number (00-4095)
xxxxxxxx is the card number (00000000-01048575).
- For HID 37-bit H10320 formatted Prox cards, 0=yy=0000000=xxxxxxxx=01 – Card number that was read from
the card.
Where:
yy is the facility number (Always 00).
xxxxxxxx is the card number (00000000-99999999).
When reading a TWIC card, the Card Reader Test screen displays.
- The diagnostic data reported is:
1111,2222,333333,4,5,6666666666788889 – TWIC Card FASC-N that was read from the card.
Where,
1111 = Agency Code
2222 = System Code
333333 = Credential Number
4 = Credential Series
5 = Individual Credential Issue
6666666666 = Person Identifier (Used as Card Number in Access ID Database)
7 = Organizational Category
8888 = Organizational Identifier
9 = Person/Organization Association
CARD READER TEST
Good Reads: 00005 Card Pulls: 00000
Parity: 00000 LRC: 00000 Timeouts: 00000
7099,7003,000079,1,1,0000153067170992
Good Read – No Error
Exit Clear

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English