Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
309
Firmware Version 3/4.31.37
Dp=Density for the Premium component
Dp’=Density specified for the Premium component
Np=Net volume loaded for the Premium component
Mp=Mass loaded for the Premium component
Ethanol meter (Meter Level) values are reported as:
Gem=M2
Tem=T2
Dem=D2 OR De
Nem=Gem*VCFe(Tem,Dem)
Mem=Nem * Dem OR Mem=Gem * D2
Where: Gem=Gross volume loaded for the Ethanol Meter
M2=Gross volume reported by meter M2
Tem=Temperature for the Ethanol Meter
T2= Volume weighted average temperature reported by probe T2
Dem=Density for the Ethanol Meter
D2=Volume weighted average Density measured OR specified for meter M2
De=Density specified for the Ethanol component
Nem=Net volume loaded for the Ethanol Meter
VCFe=API Correction Table for Ethanol
Mem=Mass loaded for the Ethanol Meter
Ethanol product (Component Level) values are reported as:
Ge=Gem
Te=Tem
De=De’ OR Dem
Ne=Nem
Me=Mem
Where: Ge=Gross volume loaded for the Ethanol component
Te=Temperature for the Ethanol component
De=Density for the Ethanol component
De’=Density specified for the Ethanol component
Ne=Net volume loaded for the Ethanol component
Me=Mass loaded for the Ethanol component
Blended product (Preset Level) values reported as:
Gb=Gr + Gp + Ge (value not to be used for trade)
Tb=((Tr*Gr) + (Tp*Gp) + (Te*Ge)) / Gb (value not to be used for trade)
Db=((Dr*Gr) + (Dp*Gp) + (De*Ge)) / Gb (value not to be used for trade)
Nb=Nr + Np + Ne
Mb=Mr + Mp + Me
Where: Gb=Gross volume loaded for the blend
Tb=Temperature for the blend
((Tr*Gr) + (Tp*Gp) + (Te*Ge)) / Gb=Volume weighted temperature for the blend
Db=Density for the blend

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English