Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
308
Firmware Version 3/4.31.37
D1=Volume weighted average Density measured while flowing Regular
OR specified for meter M1
Dr=Density specified for the Regular component
Nrm=Net volume loaded for the Regular Meter
VCFr=API Correction Table for Regular
Mrm=Mass loaded for the Regular Meter
Regular product (Component Level) values are reported as:
Gr=Grm
Tr=Trm
Dr=Dr’ OR Drm
Nr=Nrm
Mr=Mrm
Where: Gr=Gross volume loaded for the Regular component
Tr=Temperature for the Regular component
Dr=Density for the Regular component
Dr’=Density specified for the Regular component
Nr=Net volume loaded for the Regular component
Mr=Mass loaded for the Regular component
Premium meter (Meter Level) values are reported as:
Gpm=M1
Tpm=T1
Dpm=D1 OR Dp
Npm=Gpm*VCFp(Tpm,Dpm)
Mpm=Npm * Dpm OR Mpm=Gpm * D1
Where: Gpm=Gross volume loaded for the Premium Meter
M1=Gross volume reported by meter M1 while flowing Premium
Tpm=Temperature for the Premium Meter
T1= Volume weighted average temperature reported by probe T1 while flowing Premium
Dpm=Density for the Premium Meter
D1=Volume weighted average Density measured while flowing Premium
OR specified for meter M1
Dp=Density specified for the Premium component
Npm=Net volume loaded for the Premium Meter
VCFp=API Correction Table for Premium
Mpm=Mass loaded for the Premium Meter
Premium product (Component Level) values are reported as:
Gp=Gpm
Tp=Tpm
Dp=Dp’ OR Dpm
Np=Npm
Mp=Mpm
Where: Gp=Gross volume loaded for the Premium component
Tp=Temperature for the Premium component

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English