Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
315
Firmware Version 3/4.31.37
Db=Density for the blend
((Drem*Grem) + (Dpm*Gpm)) / Gb=Volume weighted density for the blend
Nb=Net volume loaded for the blend
Mb=Mass loaded for the blend
Ethanol meter (Meter Level) values are reported as:
Gem=M3 (value not to be used for trade)
Tem=T3 (value not to be used for trade)
Dem=D3 OR De
Nem=Gem*VCFe(Tem,Dem) (value not to be used for trade)
Mem=Nem * Dem OR Mem=Gem * D2 (value not to be used for trade)
Where: Gem=Gross volume loaded for the Ethanol Meter
M3=Gross volume reported by meter M3
Tem=Temperature for the Ethanol Meter
T3= Volume weighted average temperature reported by probe T3
Dem=Density for the Ethanol Meter
D3=Volume weighted average Density measured OR specified for meter M3
De=Density specified for the Ethanol component
Nem=Net volume loaded for the Ethanol Meter
VCFe=API Correction Table for Ethanol
Mem=Mass loaded for the Ethanol Meter
Ethanol product (Component Level) values are reported as:
Ge=Gem (value not to be used for trade)
Te=Tem (value not to be used for trade)
De=De’ OR Dem
Ne=Nem (value not to be used for trade)
Me=Mem (value not to be used for trade)
Where: Ge=Gross volume loaded for the Ethanol component
Te=Temperature for the Ethanol component
De=Density for the Ethanol component
De’=Density specified for the Ethanol component
Ne=Net volume loaded for the Ethanol component
Me=Mass loaded for the Ethanol component

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English