Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
325
Firmware Version 3/4.31.37
9. From the Views & Inquiries Menu, choose BSW2. After selecting the preset, the BSW2 screen displays:
10. If the observed BSW2 is different from the unadjusted BSW2 displayed, there are two options:
- Press 1 and key in the observed offset (that is, the difference between the BSW2 Unadjusted and BSW2
Adjusted).
- Or, press 2 and key in the observed BSW2 in the BSW2 Adjusted field, in which case the BSW2 Offset
will automatically be calculated and displayed.
Use the +/- key to toggle between a minus (–) sign and a plus (+) sign on the offset.
Parameter
Description
BSW2 Unadjusted
Displays the real-time BSW2.
BSW2 Offset
Displays the current BSW2 offset value, which is the difference between the
BSW2 Unadjusted value and the BSW2 Adjusted (observed BSW2) value.
BSW2Adjusted
Displays the observed BSW2 as a result of applying the BSW2offset.
PRE #1 BSW2
BSW2 Unadjusted: +50.5%
[1]BSW2 Offset: +█ %
[2]BSW2 Adjusted: +50.5%
+/- Enter Exit
PRE #1 BSW2
BSW2 Unadjusted: +50.5%
[1]BSW2 Offset: + 0.0%
[2]BSW2 Adjusted: +50.5%
Next Prev Exit

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English