Toptech Systems MultiLoad II User Manual

Chapter 13 – Custom Logic
370
Firmware Version 3/4.31.37
Press Enter to start the load.
On MultiLoad II On MultiLoad II SMP
The load starts and as it proceeds you will view the Status change as well as the amount delivered.
When the load completes, the Status will show COMPLETE, the delivered amount should equal the preset
amount.
On MultiLoad II On MultiLoad II SMP
Low Sulfur Diesel
COMPLETE
PRESET:
5000
DELIVER:
5000
GALLONS
ExitLoad Clear=Preset Enter=Start
Low Sulfur Diesel
HIGH FLOW
PRESET:
5000
DELIVER:
2501
GALLONS
ExitLoad Clear=Preset Enter=Start
PRE PRODUCT SET DEL STATUS
>1 LS Diesel 5000 5000 COMPLETE
2 Preset 002 0 0 IDLE
Next Prev ExitLoad Enter=Pick
PRE PRODUCT SET DEL STATUS
>1 LS Diesel 5000 2501 HIGH FLOW
2 Preset 002 0 0 IDLE
Next Prev ExitLoad Enter=Pick

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English