Toptech Systems MultiLoad II User Manual

Chapter 3 – GUI Configuration Tool
55
Firmware Version 3/4.31.37
3. This will trigger the Connection Configuration Wizard. Follow this to create a connection to the MultiLoad.
4. MultiMate supports three different ways to connect to a device:
 Ethernet
 Serial Port of your PC/Laptop
 Via your Tms5 or Tms6 system
Selecting Ethernet requires the IP address of the MTL.

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English