Lights and Signals 9980 Self-Propelled Peanut Combine
Light Switches
A. Dimmer switch - Controls all cab interior
lights.
B. Hazard light switch - Controls the
warning (flashing) lights, four road lights,
and the tail lights (if the engine is
running).
C. Road light switch - Controls the warning
(flashing) lights, four road lights, and the
tail lights.
D. Field light switch - Controls the grain
tank and field lights (field position). The
turn signal lever is used to control the
side finder lights when this switch is on.
The unloading auger light is controlled if
the auger is extended.
E. Work light switch - Controls the stubble
lights in position 1 and the stubble and
rear residue lights in position 2.
144 09/04/15 MAN141
To Next Page
Loading...