Amadas 9980 - Programmable Eject Default

Overhead Control Panel 9980 Self-Propelled Peanut Combine
Programmable Eject Default
The CD
player is programmed to return to
radio mode once the CD is ejected. This
default may be reset to “eject audio mute.” In
this mode, the player acts as an independent
source. After ejecting a CD, the audio volume
mutes and the display reads “NO CD”. The
receiver remains muted until the BAND button
is pressed, enabling the radio.
To change the eject default:
1. Press and hold the DPLS/TM SET button
for two seconds or until the hour digits
flash.
2.
Press the CD mode button (C) to toggle
between P.PLAY and EJMUTE.
The receiver returns to normal operation after
seconds of inactivity.
76 09/04/15 MAN141