Amadas 9980 - Diesel Oil; Break-In Oil

Fuel and Lubricants 9980 Self-Propelled Peanut Combine
Diesel Oil
Break-In Oil
New engines are filled at the factory with John
Deere Engine Break-in Oil. During the break-
in period, add John Deere Engine Break-in Oil
as needed to maintain the specified oil level.
Change the oil and filter after the first 100
hours of operation of anew or rebuilt engine.
After engine overhaul, fill the engine with John
Deere Engine Break-In Oil.
If John Deere Engine Break-
In Oil is not
available, use a diesel engine oil meeting one
of the following during the first 100 hours of
operation:
• API Service Classification CE
• API Service Classification CD
• API Service Classification CC
• ACEA Oil Sequence E2
• ACEA Oil Sequence E1
After the break-
in period, use John Deere
PLUS-
50 or other diesel engine oil as
recommended in this manual.
IMPORTANT! Do NOT use PLUS-50 oil
or engine oils meeting any of the following
during the first 100 hours of operation of a
new or rebuilt engine:
API CJ-4 ACEA E7
API CI-4 PLUS ACEA E6
API CI-4 ACEA E5
API CH-4 ACEA E4
API CG-4 ACEA E3
API CF-4
API CF-2
API CF
These oils will not allow the engine to
break-in properly.
306 09/08/15 MAN141