9980 Self-Propelled Peanut Combine Electrical System Service
Halogen Lights
CAUTION
Halogen bulbs (A) contain gas under pressure.
Handling a bulb improperly could cause it to
shatter into flying fragments. To avoid
possible injury:
1. Turn OFF light switch and
cool before changing bulbs. Leave switch
OFF until bulb change is complete.
2.
Wear eye protection when changing a
halogen bulb.
3. Handle bulb by its base. Avoid touching
bulb.
4.
Do NOT drop or scratch bulb. Keep
moisture away.
5. Place used bulb in new bulb’s carton and
dispose of properly. Keep out of reach of
children.
A – Halogen bulb
If all lights fail in a particular system, check for
a failed fuse or relay.
If a single light fails, the bulb may be burned
out.
If the problem is other than fuse, relay or bulb,
see your AMADAS/John Deere dealer.
MAN141 09/04/15 257
To Next Page
Loading...