Amadas 9980 - Safety; Cylinder Stop

Lubrication and Maintenance 9980 Self-Propelled Peanut Combine
Safety
Before performing any maintenance on your
combine, always:
 Make sure the gear shift is placed in park.
 Make sure the engine is turned off.
 Remove the key from the ignition and put it
in a safe place.
Cylinder Stop
If maintenance requires the bin to be raised,
always set the stop to prevent the bin from
closing in case of accidental hydraulic failure.
Follow the instructions for setting the cylinder
stop for your type of combine given on the
following page.
DANGER
NEVER attempt to perform maintenance
with the combine running.
316 09/08/15 MAN141