Lights and Signals 9980 Self-Propelled Peanut Combine
The hazard switch controls:
• Warning lights, which
flash to warn other drivers when you drive
on a road. The lights are located on the
rear of the combine, as shown on the
middle two photos.
• The road lights will also be on if the engine
is running (bottom photo).
• Lights on the header and on the bin are
also turned on with this switch.
The hazard light switch is a two-position (ON-
OFF) switch.
Lights must be turned on when the
combine is on public roads. Swing the
ladder fully forward so the warning light on
the side of the ladder is facing toward
oncoming motorists.
146 09/04/15 MAN141
To Next Page
Loading...