9980 Self-Propelled Peanut Combine Diagnostic Codes
A priority code is listed for
Trouble Code as follows:
Stop – indicates a problem that requires the
machine be stopped, the engine turned OFF
immediately, and the problem be corrected
before continuing. The DTC displays until the
problem is resolved.
Service Alert – indicates a problem should be
checked immediately.
Information –
DTC is stored, but is not
indicated to operator.
NOTE! These codes are also used in
John Deere Combines. Text that is
included in bold print indicates
information specific to your AMADAS SP
Peanut Combine.
MAN141 09/08/15 361
To Next Page
Loading...