Operation 9980 Self-Propelled Peanut Combine
A 1000-watt 110-
mounts in the freeze plug opening (front side
of engine). By warming the engine coolant,
the heater
reduces oil drag, eases starting,
and shortens warm up time.
To avoid shock or hazardous operation,
always use a three-
electrical cord (minimum gauge 10 AWG
and no longer than 25 feet) equipped with
three connectors. If a two- to three-
contact adapter is used at a wall
receptacle, always connect green wire to a
good ground.
Before connecting the heater to a power
source, make sure the element is
immersed in coolant. NEVER energize
the heater in air. Doing so can cause the
element sheath to burst, causing serious
personal Injury.
176 09/04/15 MAN141
To Next Page
Loading...