9980 Self-Propelled Peanut Combine Operator’s Station
Right-Hand Armrest Control
Console
The knob on the right side of the operator’s
seat (A) allows you to adjust the right-hand
armrest control console. To adjust:
1. Loosen the knob.
2. Slide the armrest up/forward or down/back
in the slots on the outer plate until in
desired position.
3. Tighten the knob to lock the armrest into
A – Armrest control knob
Seat belts are standard equipment on both
operator and instructional seats. Lap type
seat belts have a push button quick release
and auto
matic belt retraction to allow
unrestricted exiting and entering.
Inspect seat belts and mounting hardware
on your machine at least once a year. If
the seat belt system,
including the
mounting hardware, buckle, belt, or
retractor, shows any sign of damage such
as cuts, fraying, extreme or unusually
wear, discoloration or abrasion, the entire
seat belt system should be replaced
immediately. For your safety, replace the
belt system only with replacement parts
approved for your machine. See your
AMADAS/John Deere dealer.
MAN141 09/04/15 31
To Next Page
Loading...