Amadas 9980 - Quick Stop Switch

Operator’s Controls 9980 Self-Propelled Peanut Combine
56 08/05/16 MAN141.rev1
Quick Stop Switch
The quick stop switch
(top and middle
photos)
immediately shuts off all of the
following:
• Header engage
• Unloading conveyor drive
• Conveyor swing
Press the switch once to stop all of these
items at the same time.
To restart the conveyor swing or drive, press
the appr
opriate button on the handle (top
photo). To restart the header drive, turn the
header engage switch located on the armrest
panel on and off (bottom photo).
IMPORTANT! The header drive can be
disengaged immediately by the Quick Stop
switch in case of malfunctions.
Quick stop switch
Header engage
Quick stop switch
Unloading conveyor drive
Conveyor swing