Unloading Conveyor 9980 Self-Propelled Peanut Combine
After the conveyor is started, there is a five-
second delay before the two augers start
delivering material to the conveyor. The five-
second delay is factory set, but you can
change the amount of delay time as needed.
The relay panel contains a number of DIP
switches wit
h corresponding time settings.
Activating the various DIP switches allows you
to lengthen or shorten the amount of time.
Make sure the engine is turned off and the
key is not in the ignition. Do NOT perform
this function with the combine running.
Use a ladder or other suitable means to
reach this height.
198 09/04/15 MAN141
To Next Page
Loading...