Fuel and Lubricants 9980 Self-Propelled Peanut Combine
Fluid should be 6 mm (1/4 in) from top.
Fill reservoir with SAE J1703d, DOT-
DOT-4 hydraulic brake fluid.
Oil Filters
Filtration of oils is critical to proper operation
and lubrication.
Always change filters regularly as specified in
this manual.
Use filters meeting John Deere performance
specifications.
Lubricant Storage
Your equipment can operate at top efficiency
only when clean lubricants are sued.
Use clean containers to handle all lubricants.
Whenever possibl
e, store lubricants and
containers in an area protected from dust,
moisture, and other contamination. Store
containers on their sides to avoid water and
dirt accumulation.
IMPORTANT! When removing reservoir
cap, keep contaminants from entering the
312 09/08/15 MAN141
To Next Page
Loading...