Amadas 9980 - Service Intervals

Fuel and Lubricants 9980 Self-Propelled Peanut Combine
Service Intervals
The oil and filter service intervals should be
used as a guideline. Actual service intervals
also depend on operation and maintenance
practices. It is suggested that you
use oil
analysis to determine the actual useful life of
the oil and to aid in selection of the proper oil
and filter service interval.
Oil and filter service intervals are based on a
combination of oil pan capacity, type of engine
oil and filter used, and sulfur content of the
diesel fuel.
Diesel Fuel Sulfur Level
The
sulfur level of the diesel fuel affects the
engine oil and filter service intervals as in the
table.
•
Use of diesel fuel with sulfur content less
than 0.10% (1000 ppm) is strongly
recommended.
• Use of diesel fuel with sulfur content 0.10%
(1000 ppm) to 0.5
0% (5000 ppm) may
result in REDUCED oil and filter change
intervals as shown in the table.
•
BEFORE using diesel fuel with sulfur
content greater then 0.50% (5000 ppm),
contact your AMADAS/John Deere dealer.
•
Do NOT use diesel with sulfur content
greater than 1.00% (10,000 ppm).
Oil types
(premium or standard) in the table
include:
• “Premium Oils” include John Deere PLUS-
50, ACEA E7, or ACEA E6 oils.
• “Standard Oils” include John Deere TORQ-
GARD SUPREME, API CJ-4, API CI-4
PLUS, API CI-
4, ACEA E5, or ACEA E4
oils.
Oil pan
capacity
Greater than
or
equal to 0.10
Greater than
or
equal to 0.12
Greater than
or
equal to 0.14
Greater than
or
equal to 0.122
Greater than
or
equal to 0.10
Greater than
or
equal to 0.10
Greater than
or
equal to 0.10
Fuel Sulfur
Standard Oil 250 hours 250 hours 250 hours 250 hours 250 hours 250 hours 250 hours
Premium Oil 375 hours 500 hours 500 hours 500 hours 375 hours 500 hours 500 hours
Fuel Sulfur
Standard Oil 200 hours 200 hours 250 hours 250 hours 250 hours 200 hours 250 hours
Premium Oil 300 hours 300 hours 500 hours 500 hours 300 hours 400 hours 500 hours
Fuel Sulfur
Standard Oil 150 hours 150 hours 200 hours 250 hours 150 hours 175 hours 250 hours
Premium Oil 250 hours 250 hours 300 hours
500 hours
275 hours
350 hours
500 hours
Fuel Sulfur
Standard Oil 125 hours 125 hours 125 hours
Premium Oil 187 hours 250 hours 250 hours
Contact AMADAS/John Deere dealer
(dealer refers to DTAC solutions)
Contact AMADAS/John Deere dealer
(dealer refers to DTAC solutions)
Engine oil analysis is required to determine the actual extended service life of premium oils ACEA E7 and ACEA E6
0.10 to .20% (1000 to 2000 ppm)
0.10 to 0.20% (1000 to 2000 ppm)
0.20 to 0.50% (2000 to 5000 ppm)
0.20 to 0.50% (2000 to 5000 ppm)
0.50% to 1.00% (5000 to 10,000 ppm)
0.50% to 1.00% (5000 to 10,000 ppm)
U.S. Tier and EU Stage III A - PowerTech Plus
U.S. Tier and EU Stage III A - PowerTech
Oil Pan Size (L/kW)
Oil Pan Size (L/kW)
Less than 0.10% (1000 ppm)
Less than 0.10% (1000 ppm)
IMPORTANT! If using BIODIESEL blends
greater than B20, shorten the oil change
interval to half of the recommended
service interval or monitor engine oil using
OILSCAN to ensure that fuel dilution does
not exceed 5%.
308 09/08/15 MAN141